Crack Filler

Description

Repairs cracks up to 1/2" wide and 1" deep. Excellent for all concrete surfaces, including driveways. Gray color will blend with most concrete surfaces. Repaired areas will be ready for normal traffic in 30 minutes when used according to directions.

Directions

Recommended for use on horizontal surfaces only clean all loose debris and dirt from crack to be filled. Surface must be dry and free of grease or oil. Shake Shore Concrete Crack Filler before using. When ready to apply, cut pour spout and fill crack in 1/4" layers. A 24 hour drying time between applications is recommended. For deep cracks more than 1/8" wide, fill with fine sand to within 1/4" of the surface then apply Shore Concrete Crack Filler. If compound spills, clean with water immediately. Wash hands or fabric with soap and water.

Technical Information

Material Safety

Do not apply this product to surfaces when temperatures are below 50^oF. Do not return used material back into the original container. Keep from freezing. Avoid prolonged or repeated contact with the skin. In case of eye contact, flush with cool water for 15 minutes. If irritation persists, seek medical attention. Wash skin well after usage. If ingestion occurs, drink large amounts of water and seek medical attention.

[Back to Section 2 - Concrete And Masonry Maintenance Products - Sealers And Coatings]